TECHKING’S NEWS & EVENTS

Techking Tips: How to Identify the Cut-resistant Compound

2019-07-30

Generally speaking, each OTR brand needs to prepare three kinds of tread compound for mine site application, as following

  • • Heat-resistant Compound
  • • Standard Compound
  • • Cut-resistant Compound

If you have already been in OTR business for years and visited serval mine sites, it is easy for you to identify when to use Heat-Resistant Compound tire, such as high speed (50km/h), long one-way distance (more than 5km) or high TKPH. However, it’s a little bit difficult to choose Standard Compound and Cut-resistant Compound.

Here, Techking will provide a picture-guide to you.

When the road condition is as below, especially the loading and dumping area.

If you are using Standard Compound tire, the tread condition will be as following.

From the picture of tread, you can see the tread was cutting deeply.

But if you are using Cut-resistant Compound, the tread condition will be as following.

Though there are cut lines on the tread, the lines are not deep and the whole tread surface is smooth.

Let’s take an example:

29.5R25 E4 tire for ADT dumper truck in Gold mine,

  • • If the compound is a standard one, the lifetime would be about 1500-2000hours.
  • • If the compound is cut-resistant one, the lifetime could be higher than 3000-4000hours.

Right Tire to Right Application is not just a slogan. As a professional tire solution provider, Techking service team will visit the site before making the recommendation. The site condition and the tire running data is the key basis to make the solution.

Techking will attend the CONEXPO 2020

2020-03-11

On March 10, 2020, CONEXPO-CON / AGG will be held in Las Vegas, Techking Tires will show at the exhibition with crane special product ETCRANE and mining tire PROADT. Booth No. B93003. Welcome to visit our booth! Since 2006 launched the first generation of product ETGC, Techking keeps constantly self ...
Techking 24.00R35 ETDT Performance Feedback from Saudi Arabia

2020-03-03

In November 2019, Techking Technical service team visited a customer in a top cement quarry in Saudi Arabia. The site started using Techking 24.00R35 ETDT tires since 2017 and this is Techkings 5th technical support. The aim is to present sites survey reports on working condition, give technical and ...
The Third Data Tracking of 24.00R35 SUPER RDT in Russia

2020-02-25

In Nov 2019, a Techking partner visited his end user, checked the tire status of 24.00R35 SUPER RDT. This is the third tracking since this March. 3pcs have been worn out, and 4pcs waited for mounting again. The data are as follows: The final average mileage of SUPER RDT is around 105 000km, about 24% ...
The Performance of 27.00R49 Super ROCK in an Iron Mine in Russia

2020-02-05

In November 2019, the Techking team visited a customer to check the tire status of Techking 27.00R49 Super ROCK. This is the first tracking since mount of tires in August 2019. The data are as follows: The current average mileage of Super ROCK is already around 36000km with RTD 55mm. The estimated mi ...
Techking 2nd Generation 29.5R25 SUPER ADT Serving in The Biggest Quarry in Israel

2020-01-15

In November 2019, Techking Middle East service team visited the biggest quarry in Israel to check the tire performance of Techking 2nd generation 29.5R25 SUPER ADT. This quarry mainly works on crushing stones into the sand, or smaller stones for construction use after picking big stones from the moun ...
MORE NEWS